Most of us may have perceived the colorimeters by Datacolor as rather photo and print oriented. Now, that even Digital Production doesn’t come on paper anymore, they have changed directions too. And then, the first few generations didn’t earn themselves the best reputation, due to sample variation and organic color filters, which tend to fade faster.

The recent Spyders, still in their iconic three-pronged shape, should be better. We have been assured that the filter colors are anorganic now (no, we didn’t take one apart). The software got a long expected overhaul and should serve the world of film or video much better now. Of course, we’ll also compare precision with a competitor.

SpyderPro Hardware

The shell is sturdy, and the lens and sensor assembly is well protected by the counterweight. At first touch it feels like being held magnetically, but at closer inspection there are two small latches hooking into the other side. Whatever, it does its job and doesn’t fall apart in your bag. The connector is USB-C, but the unit comes with an adpter for ‚classic‘ USB-A. That’s no problem at all, the speed of the connection doesn’t matter that much. Datacolor suggests to plug it straight into your computer, though, no hub.

The only reason for some concern is the cable, which is rather thin. It might get damaged if bent in a bag or if you need to slide the counterweight too frequently when adapting to different screen sizes. The main competition by Calibrite isn’t doing any better in this respect, their clamp may even stress the equally thin cable a bit more. Just be gentle with these.

SpyderPro Software

The calibration software is very easy to operate, in simple steps from left to right. You just need to know the backlight technology of your screen and your intended target. The biggest strength is flexibility: you can handle all current technologies, from pretty old CCFL all the way to OLED and QD-OLED. If you are not sure about your screen, check here. Maximum brightness should be no issue either. The top model, the SpyderPro, can measure up to a value we’d rather not like to look at without sunglasses: 12.000 nits. 

Datacolor tends to separate models only by software now, but there still are some important differences. The older SpyderX and SpyderX2 need a paid upgrade by software, but will only measure up to 1.200 nits, just like the SpyderExpress. Last years Spyder can handle 3.000, which should suffice for any current screen. Only the SpyderPro goes all the way to those blazing 12.000. Full support of recent display technologies is available for Spyder & SpyderPro, SpyderExpress is limited to Apple Retina XDR.

The software update is free for the SpyderExpress, last year’s Spyder and the current SpyderPro. Under MacOS it’ll run on Big Sur and higher, including Tahoe. Of course, there’s a version for Windows too, but none for Linux. Well, if you know your ways around Linux, you may know how to copy and install an ICC profile, don’t you?

Look Up Tables

Apart from generating ICC profiles for your computer, you can finally export .cube 3D LUTs in several steps of precision up to 65. Those can be loaded into LUT boxes or any kind of interface supporting the option, like some SDI converters. Please note that the cheapest model by BlackMagic, the 3G SDI to HDMI for 65,- US$, will only load a lattice of 17. The 12G models, from 165,- US$ unidirectional, will support the 33 point version. This is a great option to calibrate TVs or projectors without any internal calibration capabilities and HDMI inputs only, to be used with SDI sources.

SpyderPro can calibrate and match more than one screen connected. But don’t try to move the window to the next one by yourself, the software will take care of it. You can even generate more than one profile for different lighting conditions, which will be switched automatically if the Spyder stays connected. Helpful for those working from their living rooms, but a true professional would care for a grading room with constant lighting and, most of all, no changes of color temperature.

The software can collaborate with the Datacolor LightColor Meter (see our test). But don’t expect too much: you can take up to three measurements in different locations on your desk and just feed them to the software by hand. Only brightness, no white balance, and every other source of the current Lux value will also do. Not something to brag too much about.

A more helpful menu item is installed with SpyderPro, called SpyderUtility. It will monitor the light level of your environment, if a Spyder is connected and check if the date for your next calibration is due, and inform you accordingly. Its detailed profile information and management can be very helpful, since ICC profiles are usually buried deep in your system folders. Any of those can be activated here, and also renamed or deleted if they were made by you (but not by Apple or Adobe). You can even export a 3D LUT from any of these, albeit only in the most frequently used 33 points lattice. 

Minor issues

Watch out if you have a MacBook with the infamous camera notch and already too many menu icons, SpyderUtility may be hidden and can’t be accessed by opening it directly from the Datacolor folder. A mildly irritating issue is the measurement of the monitor’s brightness during calibration. While the maximum brightness is asked for by a message in the center of the screen, the next message for getting close to the target brightness is displayed in the lower left, where it may not immediately be noticed. If you have an ultrawide, like one of our test screens, you may wonder why your calibration doesn’t continue!

If you call the Monitor Quality Analysis (Spyder MQA) without first using the calibration software, it will ask for the sensor, even if connected. You need to start SpyderPro first, but may be surprised that there’s no SpyderPro listed in the preferences. No problem, choose Spyder, and MQA is going to work.

Precision

If you want to evaluate your screen, there are several test procedures integrated under Spyder MQA, a separate software also installed by the main installer. But after the first round we were irritated by the results for color accuracy: How could it be that our calibration should be worse than the uncalibrated screen for some patches?  

Now, the choice of color patches looks pretty much photo or print oriented, while some tables used by DisplayCal are optimized for video (there are tons of choices). DisplayCal will not work with the Spyder, but isn’t it quite interesting to cross-check with the competition? So, we made one profile with the SpyderPro and its software, and one with DisplayCal and an X-Rite colorimeter. This time we got consistent results from the highly detailed verification in DisplayCal, both calibrations were quite close and perfectly usable.

Even our cheapest screen performed surprisingly well, only the darkest values were slightly above a ΔE* of 3, while most lighter values were close to or even under 2. This monitor is advertised for gamers, so video professionals may not even pay attention to the Xiaomi Curved Gaming Monitor G34WQi. Don’t worry, you can deactivate the fancy colored light on the back, so it won’t attract any insects ;-)

Some weaknesses in the darkest values are expected behaviour of LCD panels, and nevertheless a pretty impressive result for an ultrawide monitor under 250,- €. Such a screen should suffice for Rec. 709 after calibration. At least, as long as you are not working for extremely demanding clients. Clients should also not be looking over your shoulder – this is a VA screen, which has a limited viewing angle.

Those watching your results on mobile devices under less than ideal lighting won’t notice any deviation of colors in those darkest shades anyway. Of course, you can expect even better results if you need to re-calibrate a screen like this one, which is looking good not only when switched off (not saying the Xiaomi looks bad). Its factory calibration is just as good, but any screen ages and will need re-calibration sooner or later. Being a QD-OLED, this might be sooner after daily use, but you’ll get perfect blacks and dark values.

What about HDR?

The Asus QD-OLED linked above can go to some pretty serious 1.000 nits peak. Can the SpyderPro calibrate for HDR? Well, of course you can find a preset for Rec. 2020 in the software. But measuring the maximum brightness or contrast range is not an easy task. No screen for HDR can show the peak brightness for the whole screen longer than a split second, not even far more expensive ones. Trying to get around this with any hack can kill your screen, however pricey it was.

The problem for any calibration, not only SpyderPro: manufacturers have their own limits for the size of maximum highlights and adapt the brightness dynamically. If you can switch the screen to an uniform brightness mode, which is needed for calibration, that Asus for example has only 250 nits. That’s not more than most other modern screens. For the Xiaomi monitor described we measured precisely 259. Some expensive monitors offer considerably more brightness in a static mode and can be calibrated just fine by SpyderPro.

In the end, what really matters are the correct colors for the whole image. Small, but very bright areas may be a bit off, but don’t ruin the overall impression. What matters for HDR is a screen that understands those HDR standards, like Dolby Vision, HDR10, and HLG, and switches accordingly. If SpyderPro tells you that your screen is only covering 68% of Rec. 2020, that’s already a decent value, the best one we found during this review was the MacBook Pro, which covered 72%. For further explanations of Rec. 2020 read here.

And what about BlackMagic I/O devices? In our older three articles, starting here, we have described how important it is to calibrate over the whole chain, with software like DisplayCal (free). This is not yet supported by Datacolor’s software. With the recent changes in handling of profiles and tags in DaVinci Resolve 20.2.3 on MacOS, this may not necessarily be needed any more. We’ll check that very soon.

Conclusion

Both probes and their software performed equally well, so we have a choice now for video production in this price range, including screens with recent technologies and very high brightness. Datacolor is now even ahead of the game by direct export of LUTs, for which a Calibrite probe will need third-party software. Both are measuring much faster than DisplayCal, which is freeware and rather scientific in its approach. Finally, we were impressed how good a cheap monitor can be these days, at least for SDR and those producing for social media.

Color Monitoring for Cheapskates?Part 1

Colour Monitoring for Cheapskates! Part 2

Calibration for less – Part 3

The post Crawly for Videoscreens: SpyderPro first appeared on DIGITAL PRODUCTION and was written by Uli Plank.

Out of the Box

The box contents are, refreshingly, complete. The Kamvas 13 (Gen 3) arrives with everything you’d expect — and a few nice surprises: the display itself, a foldable ST300 stand, the PW600L pen, ten replacement nibs, a 3-in-1 cable. No accessory hunting required, except for a Thunderbolt capable US-C-toUSB-C. Build quality leaves a good impression. The casing feels sturdy, doesn’t creak, and at 865 grams it’s light enough to throw into a backpack. It feels more “tool” than “toy,” which is a good start.

The Kamwas 13 Display

Huion advertises the Kamvas 13 (Gen 3) as factory-calibrated to ΔE < 1.5 … our unit, however, came in at ΔE 2.5 (Adobe RGB, Measured with our Datacolor Spyder Pro). Not bad, but not “color-critical.” You’ll want to calibrate it yourself if you work on anything that depends on color accuracy, and big grading jobs or Onset-Livegrading are not recommended. Why we are saying that? For that price, you’d think you could just put it onto your DIT-Cart. You can, but you wil lhave to check the colors more often.

That said, the anti-glare surface deserves genuine praise. It’s the nicest we’ve seen so far: it kills reflections without dulling the image or killing contrast, and it feels wonderfully smooth, like a high-quality matte paper, not sandpaper. The screen itself is Full HD (1920 × 1080), which is perfectly fine for a 13-inch panel. It’s not a retina display, but at typical viewing distances it looks crisp enough for painting, layout work, or even quick note-taking.

Pen & Performance

The PW600L pen uses Huion’s PenTech 4.0 system, and it’s battery-free, a small victory in an age of rechargeable everything. During testing across Rebelle 8, Photoshop and Microsoft Ink, the pen behaved as expected: accurate tracking, no real lag, and pressure sensitivity that feels natural once you fine-tune it.

That “once” matters. Out of the box, the settings we made were too hard, and we initially thought the pressure curve was off. Turns out the issue was “idiot user”, not “hardware”. The Huion driver lets you adjust the curve quite precisely, well worth the five minutes of tinkering before judging it. After six weeks of daily sketching and note-taking, the original nib still showed no wear. The replacement nibs included should last a good long while unless you’re carving marble in Krita.

From the Left

As some of you know, one of our key ergonomics features is that we can actually use the device. And yes, I’m a Southpaw. A leftie. If you’ve ever wondered why some hardware never makes it into Digital Production, that’s the reason (Well, one of the reasons). If it’s not usable for us and the other 10% of humanity, it doesn’t get tested. Simple rule.

The Huion Kamvas 13 (Gen 3) passes this test with flying colors. In the driver software, flipping the orientation is literally one click, rotate, mirror, turn it upside down if you feel like it. There’s no directionality to the chassis and the ports, no fixed edge, angle or cable trap that dictates how you have to work. So if you’re one of us, this tablet won’t force you to contort your wrist or flip your brain to right-handed mode. And for the others: Did you recognize that the featured image above this article is a leftie drawing? No? I thought so.

Ergonomics & Workflow

The left edge holds two mechanical dials and five customizable buttons. They’re easy to reach and satisfyingly quiet. Macro assignment is limited, you can’t yet chain multiple actions (like “new layer + color switch”) but the basics are there.

Switching between monitors took a few days to get used to. In our dual-screen setup, toggling the pen focus from the Kamvas to the main monitor isn’t instant muscle memory. After a while, though, it becomes second nature. Mirroring the main display didn’t quite work in our configuration, but that’s likely a Windows quirk or a driver limitation. For most use cases, drawing, annotation, or light compositing, extending the desktop is the better option anyway.

As for Thunderbolt, a word of warning: not all cards are equal. We discovered that Thunderbolt expansion cards vary wildly between workstation manufacturers. Mixing an (Random example) Asus add-in card with a Lenovo board, for instance, another random example, is an exercise in frustration (see XKCD’s “Standards” comic). Not Huion’s fault, but worth noting if you’re planning a clean single-cable setup. Make sure your USB-C ports are Thunderbolt-capable!

Everyday Use

Once configured, the Kamvas 13 (Gen 3) simply behaves. It works as a secondary screen, a sketchpad, or a small presentation monitor. For productivity use, it’s perfectly fine: crisp enough for text, light enough for travel. The anti-glare glass remains a highlight: even after hours of drawing, the surface stays clean and non-sticky, with minimal fingerprint buildup. And because the tablet has no fan, it’s completely silent and stays cool.

One disclaimer, though: as with every tablet, it will not make you a good artist. You’ll still have to bring the talent yourself. If you’re wondering why we didn’t warn you earlier: we thought it was obvious, until we tried proving otherwise. For evidence, please refer to our attempt at a one-line house drawing. Don’t laugh — we’re mouse users by habit, idiots on top of that and it took eight failed tries to get that one semi-straight roof. There’s a reason this magazine focuses on tech, not concept art.

Verdict of the Kamwas 13

After a solid six weeks with the Kamvas 13 (Gen 3), we can confidently say this: it’s a sensible tablet. The display might not be colorist-grade, but it’s bright, balanced, and consistent. The pen feels natural, the build is solid, and the included accessories make it a ready-to-go package straight from the box. If you’re looking for a mobile, lightweight pen display that doesn’t break the bank, the Kamvas 13 (Gen 3) is easy to recommend.

Software quirks aside, it’s an ideal entry point for new artists, or a travel companion for experienced ones who don’t want to risk their main display in a backpack. We were genuinely surprised by how much performance you can get for €239 on Huion’s official store. And since our test went so well: should we ask Huion for one of their Android tablets next? Let us know, we’re curious ourselves.

The post Huion Kamvas 13 (Gen 3): Welcome to Sensible Pen Tablets first appeared on DIGITAL PRODUCTION and was written by Bela Beier.

Datacolor has announced a major overhaul of its display calibration suite with the release of SpyderPro, positioning the software as a professional-grade solution for studios and postproduction environments. The company describes it as a “quantum leap” in calibration accuracy and workflow design. Marketing rhetoric aside, the tool introduces measurable technical improvements that could matter to HDR and colour-critical workflows.

Technical updates for HDR displays

SpyderPro now supports displays up to 12,000 nits brightness, including OLED, QD-OLED, Mini-LED, and Apple’s Liquid Retina XDR panels. This covers the luminance range typical of current reference and field monitors used in HDR mastering and on-set review.

The software retains Datacolor’s colourimeter-based measurement approach but now integrates calibration control and simulation tools intended for more consistent HDR handling. Whether measurement precision remains reliable at such brightness levels has not yet been independently verified.

3D-LUT export for video workflows

A new 3D-LUT export (.cube) function allows calibrated colour transforms to be exported directly to compatible video monitors. This enables the SpyderPro to feed LUTs into devices used in video or cinema environments, simplifying display matching.

Device Preview Plus: cross-device simulation

SpyderPro introduces Device Preview Plus, a simulation and comparison tool allowing users to preview how images appear on different displays or in print. The feature supports side-by-side comparisons, pixel sampling, batch conversions, and extended export options. For production artists, this could serve as a quick-check tool when evaluating deliverables across multiple output devices.

Integration with light meters

The new light-meter integration enables synchronisation with Datacolor’s LightColor Meter and other lux-capable devices. This function adjusts calibration according to ambient illumination, potentially improving accuracy in variable lighting conditions, a practical addition for studios with mixed lighting setups.

Content authenticity with C2PA

SpyderPro now embeds Content Credentials (C2PA), an open standard for cryptographically securing authorship and edit history metadata. This allows creatives to attach verifiable provenance data to calibrated outputs. The move reflects growing industry interest in transparency within AI-influenced workflows.

We are currently preparing a story on content authenticity and will be speaking directly with Datacolor about how C2PA is implemented in SpyderPro, what data it embeds, and what that means for creative verification. Keep your eyes peeled for that.

Pricing and availability

The new SpyderPro software is available immediately for €289 through Datacolor.com, Amazon, and authorised resellers. Existing SpyderPro owners receive the update free of charge. Users of Spyder, Spyder Express, SpyderX, or Spyder X2 can upgrade at a discounted rate.

Verdict

SpyderPro’s technical claims (HDR coverage to 12 k nits, LUT export, and ambient-light integration) target postproduction more directly than earlier Spyder tools, which often leaned toward photographic use. As with any colour management solution, results depend heavily on hardware quality, measurement repeatability, and consistency of use.

The post SpyderPro goes full HDR with receipts (C2PA) first appeared on DIGITAL PRODUCTION and was written by Bela Beier.

Datacolor today unveiled the SpyderExpress, positioned as the most budget-friendly entry in its monitor-calibration tool family.

Notably, the SpyderExpress is built to evolve. Starting October 2025, users will be able to expand its feature set, adding Device Preview, soft-proofing, monitor matching, video-oriented tools, and enhanced OLED or mini-LED display support, through software upgrades that do not require new hardware. Datacolor terms this upgrade path the Spyder-ECO ecosystem.

The device promises professional-level screen profiling in under two minutes via a easy three-step workflow. It supports modern display hardware including Apple’s latest mini-LED XDR displays like the MacBook Pro M4, and the user can calibrate up to three monitors per workstation. From digital content through print, the SpyderExpress adapts to the user’s medium right out of the box.

Context: Where SpyderExpress Fits in Datacolor’s Lineup

Datacolor’s existing calibration tools— Spyder and SpyderPro (read our test of the SpyderX) already support modern display technologies like OLED, mini-LED, and Apple Liquid Retina XDR, with the Pro version targeting video-centric workflows and advanced calibration control such as StudioMatch, soft-proofing, and Device Preview (still beta). The SpyderExpress delivers a streamlined, entry-level alternative, offering core calibration features immediately, with the potential to match upsides of the more advanced models over time via software.

Getting Colors Right with the Datacolor LightColor Meter

Why This Matters to Creative Professionals

Colour-accurate monitoring is essential in digital production—from image editing to motion work and print proofing. The SpyderExpress simplifies that process in a package both fast and affordable. The ability to upgrade functionality through software, rather than purchasing entirely new hardware, lowers cost barriers and encourages long-term adoption. For teams deploying multiple monitors, the ability to calibrate three at once adds practical efficiency.

Test-First Caution: Always Validate Before Production Use

As with any calibration tool, especially new software-driven models, we recommend rigorous in-studio or in-post testing before integrating SpyderExpress analytics into deliverables or final outputs.

„For Those Who Dare“

The post Datacolor’s SpyderExpress: Colour Calibration on a Budget, Now with Growth Path Options first appeared on DIGITAL PRODUCTION and was written by Bela Beier.

Datacolor, known for its color management tools, is hosting a free online webinar on June 26 at 7:00 PM CET / 1:00 PM EDT, focusing on underwater photography. The session is led by Kate Jonker, a seasoned underwater photographer, writer, and Datacolor’s “Friend with Vision”. Registration is available via Datacolor’s official page. Missed it live? No problem – registered users will get access to the recording.

Lighting, Lenses & Little Critters

The webinar promises an overview of gear, lighting setups, and techniques used to photograph a range of underwater subjects – from the macro (tiny marine critters) to the wide-angle (entire reef scenes). Jonker will share real-world tips, scene setups, and anecdotes from her work in the field.

This is not a product demo or software training – the focus is on photographic methods and practical approaches under unpredictable conditions, where light falloff, color balance, and buoyancy present specific challenges.

While not directly related to postproduction workflows, the knowledge applies to anyone handling underwater footage in color grading, editing, or VFX cleanup, where understanding the source lighting is half the job.

Participation is free. Sign up on the Datacolor website to attend or receive the recording later.

Not Our Usual Pool – But We Like the View

Granted, Digital Production isn’t a photography magazine – we usually stick to pixels in motion, simulated explosions, and render passes gone rogue.

But many of the artists we cover also shoot stills, and over the years, we’ve seen more than a few stunning underwater frames from Jonkers cross our editorial radar. So when we get a chance to see her live and explain the stuff, we don’t mind getting our feet wet – and Jonker’s pictures are awesome.

The post Sink or Shoot: Datacolor Webinar on Underwater Photography first appeared on DIGITAL PRODUCTION and was written by Bela Beier.