Table of Contents Show
For those who don’t know the tool: 3DF Zephyr is 3Dflow’s standalone photogrammetry application for turning overlapping photographs into point clouds, polygon meshes and textured models. It takes a capture through reconstruction and cleanup, with editions ranging from personal experiments to professional surveying.
This news is arriving a little late because my 3D printer and I have been investigating a hole in a model. The slicer didn’t catch it. Which brings us rather neatly to Zephyr 9.5 and its improved hole-filling tools. Faster reconstruction is lovely. A model with all its intended surfaces present is also a surprisingly attractive feature. Let us address the hole situation.
A hole new appreciation for mesh repair
A photogrammetry mesh represents surfaces reconstructed from the photographs. If an area was not visible, the capture does not contain the evidence needed to reconstruct it faithfully. The underside of an object resting on a table is an obvious candidate. Filling that gap creates a patch; it does not retrospectively send a camera under the table. For an accurate reproduction, capturing the missing surface is preferable where possible.

Zephyr’s documented Fill Holes tools offer two approaches. Selective mode lets you pick a hole in the viewport or choose its number, with an outline showing the selected boundary. A size-threshold slider provides another way to choose holes. WaterTight mode fills all holes automatically; the manual recommends it for complex cases that Selective mode may not handle. These modes already existed. The 9.5 announcement says the tools have been revised and improved, without specifying a replacement algorithm or a guaranteed success rate.
That makes repair inside the reconstruction application a useful checkpoint before export. Close the unwanted gaps, inspect the resulting shape, and check the exported mesh again in the slicer. Do not turn “fill all” into a religious commitment: the intended shape still matters. The manual also warns that a patch may receive incorrect colour where no camera saw the surface. Closing geometry cannot conjure photographic evidence. Even software has to draw the line somewhere, preferably around a complete polygon.
Nor does a closed surface automatically make an object printable. Wall thickness, overlapping geometry, scale and support requirements still need attention. Prusa’s repair guidance explicitly notes that automatic slicer repair has limits. Inspect the layer preview before printing, especially around repaired areas. My contribution to this workflow is the reminder that “it loaded” and “it is fine” are two very different sentences.
Less waiting for the point to emerge
The 9.500 changelog also reports faster Structure-from-Motion and Multi-View Stereo processing. SfM finds corresponding image features and estimates camera positions and orientations, producing the sparse reconstruction. MVS uses the calibrated views to recover denser surface information. These are successive reconstruction stages, so improvements here address work before mesh cleanup begins. No benchmark figures accompany the release; how much time you save needs testing on your own images and hardware. We cannot responsibly convert “faster” into a number of coffees.

The LOD Mesh dialogue has also gained faster loading and better responsiveness. Sections and level curves get improved extraction quality, as do guided breaklines. The Volume from Projection tool has been reworked. These are useful distinctions: contour and section extraction concerns the shape information you take out of a reconstruction, while projected-volume measurement concerns volume relative to a plane. Neither should be confused with patching a printable object. The word “volume” has enough responsibilities already.
Three specific fixes complete the core changelog: incorrect GPS data after merging, inconsistent video-frame extraction when using the similarity threshold, and exported videos that were incompatible with Instagram and Facebook. Geography, frame selection and social compatibility: a surprisingly broad support group. And genuinely surprised anybody uploads anything besides AI slop to Facebook these days.

Jimbo learns what to leave out
The companion release is 3DF Jimbo, an application for training segmentation models on your own datasets. Its output feeds classification in Zephyr or image masking in Masquerade. This is a separate job from closing mesh holes: it teaches a model to identify image content. Jimbo sorts the photographic company you keep.


Training examples pair a source image with a binary mask: white for the target, black for the background. Matching filenames associate the pairs, and synchronised views let you inspect their alignment. Training runs locally on CPU or GPU. Controls expose epochs, the training/test split, batch size, optimiser and learning-rate scheduling. Checkpoints preserve progress, automatic saves can run at intervals, and a live plot reports training behaviour. Export produces the model file for the receiving application.
The Jimbo tutorial uses 100 epochs, an 80% training split and a batch size of four as example settings. Larger batches need more GPU memory; the tutorial advises reducing the batch size if memory runs out. Those are starting examples, not commandments etched into a graphics card. Access remains limited to selected customers who contact the developer.
Start small, keep your options open
We like Zephyr. For us, it is among the best dedicated tools in this field, and one of our general recommendations for people who want to try photogrammetry and keep using the same tool as their ambitions grow. If the prospect of learning Unreal Engine makes your first scan feel like an application for a second career, a dedicated reconstruction application is an inviting starting point. You can concentrate on photographs, geometry and the increasingly philosophical question of whether you photographed the bottom.
That recommendation has room to grow: presets help with a first reconstruction, while advanced controls and edition-dependent survey tools support more demanding work. The full edition adds capabilities such as laser-scan handling, control points, measurements, orthophotos and GIS/CAD workflows. Our earlier Zephyr 9 coverage also covers its Gaussian Splatting addition.
Zephyr Free is free for personal use, has no time limit and accepts up to 50 photos per project. Editing and export are restricted, so check the edition comparison against the hand-off you need. It is a sensible place to learn capture and reconstruction without a countdown glaring at your first point cloud.
For evaluating the paid editions, the current trial form offers 30 days of Zephyr or Zephyr Lite and requests a company or institutional email address. Lite costs €199 plus VAT for a perpetual licence with 12 months of updates; the current product page lists unlimited input images, subject to available memory. The full edition is €250 plus VAT per month or €4,200 plus VAT perpetual. Perpetual licences include a year of updates; continued use of the licensed version does not depend on renewing updates.
On the workstation side, the current manual lists Windows 10/11, 16 GB RAM minimum and 32 GB recommended. GPU acceleration uses supported NVIDIA CUDA or OpenCL hardware; the edition controls the number of GPUs available. Free uses one, Lite up to two, and the full edition supports multiple GPUs. RAM still has to accommodate the dataset. “Unlimited images” is a licence condition, not a promise that your workstation has become infinite.
Try a representative object, inspect the reconstruction, repair unwanted openings and check the exported model’s scale and layer preview before committing to a long print. Zephyr gives that process a focused home, and 9.5 improves several of its working parts. A little mesh maintenance now can save a rather hollow victory later.
https://www.3dflow.net/3df-zephyr-9-5-is-out-now/
https://www.3dflow.net/3df-zephyr-free/
| Product | 3DF Zephyr 9.5 |
| Developer | 3Dflow |
| Platform | Windows 10/11 |
| Workflow | Photographs to point clouds, meshes and textures; mesh cleanup and edition-dependent survey tools |
| Repair | Selective and WaterTight hole filling; improvements in 9.5 |
| Free edition | Personal use; up to 50 photos per project; no time limit; restricted editing/export |
| Trial | 30 days for Zephyr or Lite; company/institutional email requested |
| Pricing | Lite: €199 + VAT perpetual. Full: €250 + VAT/month or €4,200 + VAT perpetual. Perpetual licences include 12 months of updates. |
| Jimbo | Local segmentation-model training for Zephyr/Masquerade; selected-customer access |



